Hurricane Impact Glass Specifications: How to Read the Glass Details on Your Window Quote

Home ยป Hurricane Impact Glass Specifications: How to Read the Glass Details on Your Window Quote
PGT impact glass sliding doors opening onto a pool patio

Hurricane Impact Glass Specifications: How to Read the Glass Details on Your Window Quote

Hurricane impact glass specifications are the details that tell you how your window's glass is built, what it's been tested to handle, and how well it keeps out Florida heat. You'll find them in a few short lines on your quote and on the sticker that comes on every new window. If you're holding two quotes and the glass sections might as well be written in code, you're in good company.

The good news is you don't have to become a glass expert. You only need to know which lines matter, what they mean for your house, and what to ask when one's missing.

PGT impact glass sliding doors opening onto a pool patio

What Glass Specs Show Up on an Impact Window Quote?

Most impact window quotes list the glass type, impact rating, design pressure, energy numbers, and any tint or coating. Some quotes spell every one of these out. Others tuck them inside a product name, which makes it harder to compare.

What you'll see What it means What to ask
Laminated glass or laminated insulating glass Two panes bonded together, or those two plus a third pane for insulation Which type is each opening getting?
Impact rated / Large Missile The glass and frame passed the debris test Florida code requires here Does every opening on the quote have it?
Design pressure (DP) The wind load the window can handle, measured in pounds per square foot Is that DP right for where my house sits?
U-factor, SHGC, VT The energy numbers from the window's NFRC label What's the SHGC on this glass?
Florida product approval (FL#) The state approval number for that product Can I see the FL# for each window?

DP is a topic of its own, and it's worth knowing what the design pressure number on your quote means before you start comparing prices. Everything else on this list comes down to the glass.

Laminated Glass vs. Laminated Insulating Glass: Which One Is on Your Quote?

Laminated glass is two panes bonded with a clear interlayer, and laminated insulating glass adds a third pane for insulation. PGT calls its laminated glass a "glass sandwich" because once it's sealed, the layers act as a single unit. The insulating version takes that same sandwich and adds one more pane.

Both count as impact glass. The bonded layers are what keep laminated glass intact when something hits it. That third pane is there for comfort and energy savings. It isn't what makes the glass impact resistant.

So if one quote says "laminated" and the other says "laminated insulating," you're looking at two different kinds of glass. Ask for the energy numbers on both and compare them side by side. You may also see them in shorthand: laminated insulating glass is often listed as LIG, and laminated glass as LAMI.

What "Large Missile" Means on Your Impact Rating

"Large Missile" means the window passed the heavy-debris impact test, and that's the one Florida requires for homes in windborne debris regions like Brevard and Indian River County. The Florida Building Code, Residential, requires glass openings in those areas to meet the Large Missile Test per ASTM E1996 and ASTM E1886.

Here's what that test looks like. A lab shoots a 9-pound piece of lumber at the window, then hits it with round after round of pressure to mimic hurricane winds. You might also see "Small Missile" in some product brochures. That's a lighter test meant for openings more than 30 feet off the ground, so it's not what most homes here need.

If your quote says "impact" but never mentions a missile level or a product approval number, ask. That testing is what separates impact-resistant glass from regular window glass, so you'll want to see it in writing.

U-Factor, SHGC, and VT: The Energy Numbers on the NFRC Label

The NFRC label lists three energy numbers, U-factor, SHGC, and VT, and in Florida, the one to pay attention to is SHGC. The National Fenestration Rating Council is the independent group that certifies these ratings, and any certified window has to carry its label.

What each number tells you:

  • SHGC (solar heat gain coefficient): how much of the sun's heat gets through. Lower is better here.
  • U-factor: how much heat moves through the whole window. Lower means it insulates better.
  • VT (visible transmittance): how much daylight comes in. Higher means a brighter room.

Your AC runs most of the year, so keeping the sun's heat out does the most for your power bill. That's what a Low-E coating on impact glass is for. Trading older windows for energy-efficient impact glass can cut cooling costs by up to 30%.

Tints and Glass Color: Matching Your Home and HOA Rules

Tint is the color of your glass, and it's worth deciding early because a lot of HOAs and condo associations have rules about it. PGT's glass options include clear, bronze, gray, green, and azure blue, plus a few specialty tints.

Check your community's guidelines before you fall for a color. Some associations want every house or unit to match, and the tint you loved in the showroom might not make it past your board. Get the approved tint in writing before your consultation, and you'll skip a lot of back-and-forth.

One thing people mix up: tint and Low-E are two different things. Tint is about color. Low-E is a coating that handles heat, so you can have clear glass with Low-E on it. At Sunset View, we sit down with you to choose the right tint and Low-E combination for your home and how you use each room.

How to Check a Glass Spec Yourself

You can look up any impact window's Florida product approval and its NFRC energy ratings on your own, and it's free. Ask your installer for the FL# on each product, then search it on Florida's product approval site. The approval shows how the product was tested and what sizes it's approved for.

For the energy numbers, you can pull up a product's certified U-factor, SHGC, and VT in the NFRC certified product directory. It takes a few minutes, and it's an easy way to check whether two quotes that sound the same actually are.

What Glass Specs Don't Tell You

Glass specs cover the product itself, so a few important things never appear in them.

  • How it's installed. A window only lives up to its rating when it's installed the way its approval requires.
  • Whether it's hurricane-proof. It isn't. Impact glass is hurricane resistant, meaning it's tested against flying debris and wind pressure, and no glass can promise it'll survive every storm.
  • Whether your insurance will go down. Any discount depends on a wind mitigation inspection (Florida's OIR-B1-1802 form), done by a licensed inspector and sent to your insurer.
  • What happens in a flood? Impact windows are water-resistant and sealed against wind-driven rain. Floodwater and storm surge are outside what any window is designed for.

Frequently Asked Questions

What are hurricane impact glass specifications?

Hurricane impact glass specifications are the details about an impact window's glass: how it's built, which impact test it passed, its design pressure, and its energy ratings. You'll see them on your quote, on the window's labels, and in the Florida product approval.

How thick is impact glass?

It depends on the product and the size of the window, and the thickness on its own won't tell you much. What proves the glass is up to the job is the impact rating and the Florida product approval, so ask for those.

Is laminated glass the same as impact glass?

Impact glass starts as laminated glass and earns its rating by passing impact testing when part of a complete window. Laminated just describes how it's made: two panes bonded with an interlayer. The rating comes from testing the whole window, glass and frame together.

Does impact glass come with Low-E?

It can, and in Florida, it's worth asking for, since Low-E cuts down the sun's heat coming through your glass.

Can I get tinted impact glass?

Yes. Impact glass comes in several tints, including bronze, gray, and green. Just check your HOA or condo association's rules first, since many of them regulate glass color.

Why Brevard and Indian River County Homeowners Choose Sunset View

If something on your Sunset View quote doesn't make sense, ask us. You'll get a straight answer from the company whose employees will install the windows, and we back their work with a 10-year workmanship warranty.

We've been a veteran-owned, family-run business since 2006, working in homes throughout Brevard and Indian River Counties, and we're an authorized PGT Gold and Platinum Certified Dealer. Financing is available, and you can take as long as you need to decide. Whenever you're ready to talk through glass options, contact Sunset View, and we'll set up a free quote.

Let Us Help You Make The Right Choice

More Tips & Advice

Aluminum vs Vinyl Sliding Doors: Which Is Better for Your Florida Home?

An aluminum sliding door uses a metal frame to support large glass panels across a wide opening, while a vinyl sliding door uses a multi-chambered PVC frame built for insulation and corrosion resistance in standard patio applications. Both are available in impact-rated configurations for Florida. The one that belongs in your home depends on the […]

What Time of Year Is Best to Replace Windows in Florida?

The best time to replace windows in Florida is early fall or early spring, when mild temperatures, lower humidity, and more predictable weather create the smoothest conditions for installation. That said, Florida's climate means windows can be replaced year-round, and for many homeowners, the more important question isn't which season to pick, but how far […]

Find Us

Mon - Thurs: 8am - 4:30 pm

Fri: 8am - 3:00 pm

2920 Bush Drive STE 101 Melbourne, FL 32935

Contact Us


Copyright 2025 Sunset View Construction. All Rights Reserved.


Privacy Policy

License: #SCC131152651